Dynavector DV 20X2H/L cartridge User Manual download pdf

 Description

For more than 35 years Dynavector have

established an enviable reputation for producing

affordable high quality moving coil cartridges.

Notably high output models that are designed to

work with MM inputs negating the necessity for

equipment change or the use of setup devices

required for low output cartridges. The outstanding

performance of the Dynavector high output moving

coil cartridges can be attributed to the exclusively

Dynavector designed coil winding machine capable

of utilizing extremely fine coil wire providing a high

output to mass ratio.

DV-20X2 has a solid aluminum alloy body and a

rigid magnet construction similar to XX-2MKII. The

cantilever is a 6mm length of hard aluminum pipe

with a Micro-Ridge stylus. The magnetic flux

damping and softened magnetism along with

powerful neodymium magnets gives the 20X2H a

healthy 2.8 mV output - suitable for most MM

inputs. The 20X2L has an output of 0.3 mV ideal

for most MC phono stages.

Both high and low versions of their 20X2 are

available to ensure the optimum end result. The

high output model is well suited to valve

preamplifiers or electronics that only offer MM inputs

whilst the low output version offers superb

performance when combined with dedicated moving

coil inputs.

 Stylus Replacement and Warranty

In the case of a worn stylus, Dynavector

undertake to provide a replacement at a special

discount rate. The same special discount applies to

all non warranty claims. Please consult your retailer

for details.

The cartridge is warranted for a period of one

year from date of purchase against electrical and

mechanical defects, provided the instructions have

been adhered to and the warranty card has been

completed.

The guarantee does not cover stylus wear nor

cover damage to the stylus assembly arising from

mishandling or abuse. Should a defect occur, the

cartridge and its casing together with the guarantee

card should be carefully packed and returned to the

retailer.

 Stylus Cleaning

Keep your records clean. Dust causes record

wear and sonic distortion. When cleaning the stylus

use the soft brush supplied with the cartridge.

Always use a minimum amount of high quality

stylus cleaning fluid. Brush only from back to front

to avoid damage to the stylus assembly. Excessive

amounts of alcohol applied to the stylus rubber

damping and coil bobbin can have a detrimental

effect on the life of the cartridge and in extreme

cases cause the stylus to become detached from

the cantilever.

Dynavector MC Cartridge 20X2H and 20X2L

 Connection

Connect the lead wires from the headshell to

each pin shown below.

16-15 Iwamoto-cho 2-chome Chiyoda-ku

Tokyo 101-0032 Japan

Phone +81-(0)3-3861-4341 FAX +81-(0)3-3862-1650

http://www.dynavector.com/

Dynavector Systems, Ltd.

: High/Low output MC cartridge with

Flux damper and Softened magnetism

: 2.8mV / 0.3mV (at 1KHz, 5cm/sec.)

: 20 - 20,000Hz (±2dB)

: 25 dB (at 1KHz)

: 1.0 dB (at 1KHz)

: 12 x 10-6 cm/dyne

: R=150 ohms / 5 ohms

: Micro Ridge Nude diamond

: 6mm length hard aluminium pipe

: 1.8 - 2.2 grams

: >1000 ohms / 30 ohms

: 9.2grams

Type

Output voltage

Frequency response

Channel Separation

Channel balance

Compliance

Impedance

Stylus

Cantilever

Tracking force

Recommended load

impedance

Weight

 Specifications

This product can be recycled. Products bearing this

symbol must NOT be thrown away with normal household

waste. At the end of the product's life, take it to a collection

point designated for recycling of electrical and electronic

devices. Find out more about return and collection points

through your local authority.

The European Waste Electrical and Electronic Equipment

(WEEE) Directive was implemented to dramatically reduce

the amount of waste going to landfills, there by reducing

the environmental impact on the planet and on human

health. Please act responsibly by recycling used products.

If this product is still useable, consider giving it away or

selling it.

 Fixing to the headshell

Please use the M.2.5

enclosed screws to mount

the cartridge.

The overhang should be

aligned according to the

instruction manual for the

tonearm. Azimuth and VTA

also should be adjusted

correctly.

12060001V2

2H and 20X2L 1

Summary of Contents

Page 1 - 2H and 20X2L

 Description For more than 35 years Dynavector have established an enviable reputation for producing affordable high quality moving coil cartridg

Comments to this Manuals

No comments

Dynavector DV 20X2H/L cartridge User Manual

Browse online or download User Manual for Photo Accessories Dynavector DV 20X2H/L cartridge. Dynavector DV 20X2H/L cartridge User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Photo Accessories Dynavector DV 20X2H/L cartridge